Table Of Contents

User Peripherals

Last Modified: May 14, 2018

The prototyping board includes the following circuit components:
  • LEDs
  • Momentary push buttons
  • Slide switches
  • Potentiometers
  • Audio input conditioning
  • Audio output conditioning
  • Test points

These resources are accessed through dedicated solderless breadboard strips located to either side of the board. The solderless breadboard strips provide two connection points per signal, and each signal is labeled directly on the solderless breadboard. These resources are not pre-connected to any of the control I/O signals.

Figure 1. Hardware Architecture of User Peripherals

Recently Viewed Topics