Table Of Contents

Connecting to the Device via USB

Last Modified: November 26, 2019

Complete the following steps to use a USB cable to connect the NI ELVIS III from the USB device port to your host computer.

  1. Connect the Type-C to Type-A USB 2.0 cable to the NI ELVIS III as shown in the following figure:
  2. Connect the other end of the USB cable to the host computer.

    Ensure that the host computer is powered on before connecting the USB cable.

If the connection is successful, you can see the IP address of the USB connection on the OLED display of the NI ELVIS III after you install the Measurements Live Support Files. Press and hold the user programmable button (Button 0) on the left-hand side of the NI ELVIS III workstation until you turn on the display. The IP address of the USB connection appears after the icon.

The device does not need an ID when connected via USB. The OLED display returns ID not available when you connect the device via USB only.


Go to Setting up the Host Computer to set up the software environment.


Go to Configuring the Device if you need to upgrade the software on the device or set up an administrator password.

Recently Viewed Topics