Table Of Contents
Connecting Signals to Analog Output
Last Modified: August 8, 2019
There are no configuration settings for the analog output channels. All of the analog output channels are single-ended. Each analog output is always referenced to the analog ground (AGND). The following table shows the channel mapping.
Table 1. Analog Output Signal Mapping
| Application Board Terminals | Signal | |
|---|---|---|
| Bank A | A/AO0 | AO 0 |
| A/AO1 | AO 1 | |
| Bank B | B/AO0 | AO 0 |
| B/AO1 | AO 1 | |
| AGND | Analog Ground | |
You can use the NI ELVIS III Prototyping Board to access these signals. The following diagram shows the NI ELVIS III with the analog output terminals highlighted.
