Table Of Contents

Configure Trigger (G Dataflow)

Last Modified: July 23, 2019

Configures triggers.

node_icon
Configures History RAM to acquire pattern information starting from a specified cycle number.
node_icon
Configures the Start trigger for digital edge triggering.
node_icon
Configures History RAM to acquire pattern information starting from the first failed cycle encountered.
node_icon
Configures History RAM to acquire pattern information starting from a specified label.
node_icon
Configures the Start trigger for software triggering.
node_icon
Disables a previously configured Start trigger.
node_icon
Configures the conditional jump trigger instance to trigger on an incoming digital edge and routes the specified signal source to the instrument.
node_icon
Configures the specified conditional jump trigger instance for software triggering. To assert the trigger, use the niDigital Send Software Edge Trigger node.
node_icon
Disables the conditional jump trigger instance and releases the existing route for the trigger.

Recently Viewed Topics