Table Of Contents

Sequencer Flags and Registers Opcodes

Last Modified: November 23, 2020

Syntax Parameters Description
set_seqflag(seqflag_list) seqflag_list is a comma-separated list of sequencer flags. You cannot repeat flags. Valid values include seqflag0, seqflag1, seqflag2, and seqflag3. Sets the specified pattern sequencer flag(s). Use sequencer flags to coordinate execution between the pattern sequencer and a test program at run time.
clear_seqflag(seqflag_list) seqflag_list is a comma-separated list of sequencer flags. You cannot repeat flags. Valid values include seqflag0, seqflag1, seqflag2, and seqflag3. Clears the specified pattern sequencer flag(s). Use sequencer flags to coordinate execution between the pattern sequencer and a test program at run time.
write_reg(register, numeric) Valid values for register include reg0 - reg15.

numeric is the data (16 bit) in decimal format. Valid values are 0 – 65535.

Writes to one of the pattern sequencer registers. Use pattern sequencer registers to pass numeric values between the pattern sequencer and a run-time test program.

Example 1

clear_seqflag(seqflag3, seqflag0)   sample_timeset  0 L;

Example 2

set_seqflag(seqflag2, seqflag1)     sample_timeset  1 H;

Example 3

write_reg(reg5, 45562)              sample_timeset  0 L;

Recently Viewed Topics