Specifies the number of Sample Clock Timebase pulses needed to produce a single Sample Clock pulse.
The rate of the Sample Clock is equal to (frequency of Sample Clock Timebase) / (value of this property).
If the Sample Clock Timebase is not a periodic clock, the value of this property determines the number of Sample Clock Timebase edges that the device must receive before producing each Sample Clock pulse. Use SampClk.Timebase.ActiveEdge to specify the polarity of these edges.
Setting this property has a similar effect to setting SampClk.Rate . Use SampClk.Rate when you know the rate of the Sample Clock Timebase and you want to acquire or generate samples at the specified rate. Use this property when you have an external timebase that you want to divide down and use as the Sample Clock, but you do not know rate of the external timebase.
Long Name: Timing:Sample Clock:Timebase Divisor
Class: DAQmx Task
Where This Property Is Available:
Desktop OS: Windows
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application