Table Of Contents

DAQmx Setup SC Express Calibration (4330/1) (G Dataflow)

Last Modified: July 19, 2019

Initializes an NI PXIe-4330 or NI PXIe-4331 device with the specified excitation voltage value for calibration.


calHandle in

calHandle in is a reference to the calibration session that you created using the DAQmx Initialize External Calibration node.


physical channels

physical channels specifies the physical channel(s) to calibrate.


excitation voltage

excitation voltage specifies the excitation voltage setting to calibrate


error in

error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.


calHandle out

calHandle out is a reference to the calibration session. Wire this output to other external calibration nodes.


error out

error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.

Where This Node Can Run:

Desktop OS: Windows

FPGA: LabVIEW NXG does not support FPGA devices

Web Server: Not supported in VIs that run in a web application

Recently Viewed Topics