| Name | Description |
|---|---|
| ActiveTimingSrc | Specifies the timing source from which to retrieve properties. |
| TimingSrcType | Indicates the type of timing source. |
| ControlLoopFromTask.SleepTime | Indicates in microseconds the amount of time the Timed Loop sleeps after each sample clock pulse. |
| Freq.Counter | Indicates the counter the timing source uses. |
| Freq.Freq | Indicates the frequency of the timing source. |
| DigChangeDetect.RisingEdgePhysicalChans | Indicates the names of the digital lines or ports on which to detect rising edges. |
| DigChangeDetect.FallingEdgePhysicalChans | Indicates the names of the digital lines or ports on which to detect falling edges. |
| DigitalEdgeCtr.Counter | Indicates the counter the timing source uses. |
| DigitalEdgeCtr.Edge | Indicates on which edges of the digital signal each iteration of the Timed Loop executes. |
| DigitalEdgeCtr.EdgeCount | Indicates the number of edges of the digital signal that must occur for each iteration of the Timed Loop to execute. |
| DigitalEdgeCtr.Term | Indicates the terminal to which you connect the digital signal you want to use for the timing source. |
| SignalFromTask.Signal | Indicates the signal the timing source uses. |