Adjusts the external calibration constants for an SCXI-1124 module.
calHandle in is a reference to the calibration session that you created using the DAQmx Initialize External Calibration node.
measured output specifies in volts or amperes the voltage or current measured at the output channel specified in the DAQmx Setup SCXI Calibration node.
error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.
calHandle out is a reference to the calibration session. Wire this output to other external calibration nodes.
error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.
Where This Node Can Run:
Desktop OS: Windows
FPGA: LabVIEW NXG does not support FPGA devices
Web Server: Not supported in VIs that run in a web application