Table Of Contents
DAQmx Setup SC Express Calibration (4330/1) (G Dataflow)
Initializes an NI PXIe-4330 or NI PXIe-4331 device with the specified excitation voltage value for calibration.
calHandle in
calHandle in is a reference to the calibration session that you created using the DAQmx Initialize External Calibration node.
physical channels
physical channels specifies the physical channel(s) to calibrate.
excitation voltage
excitation voltage specifies the excitation voltage setting to calibrate
error in
error in describes error conditions that occur before this node runs. This input provides standard 'error in' functionality.
calHandle out
calHandle out is a reference to the calibration session. Wire this output to other external calibration nodes.
error out
error out contains error information. If error in indicates that an error occurred before this node ran, error out contains the same error information. Otherwise, error out describes the error status that this node produces.
Where This Node Can Run:
Desktop OS: Windows
FPGA: LabVIEW NXG does not support FPGA devices