Table Of Contents

Configure Path (G Dataflow)

Version:
    Last Modified: December 18, 2017

    Specifies the path through which the signal is routed.

    The direct path routes the input signal directly to the output of the RF signal conditioning device. This node reports errors if the appropriate channel name is not specified.

    connector_pane_image
    datatype_icon

    session in

    Instrument session obtained from Initialize .

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    channel name

    Channel in which to use the specified path.

    Default: 0

    datatype_icon

    path

    Path used by the device.

    Main Path and Direct Path Behavior by Device

    The following table shows how the main path and direct path vary by device.

    Default: Main Path

    datatype_icon

    session out

    Reference to your instrument session passed to the next node.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Device-Specific Configurable Path Support

    The PXI-5690 and PXI-5691 support configurable paths for CH 1 only, while the PXI-5695 supports configurable gain for CH 0 only.

    For the PXI-5690 and PXI-5691, the main path allows you to configure gain using Configure Gain .

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application

    Hardware Support:

    This node supports the following hardware:

    • PXI-5690
    • PXI-5691
    • PXI-5695


    Recently Viewed Topics