Table Of Contents
Configure Scope (G Dataflow)
Configures the length of each scope mode acquisition record and the number of points in each record.
This node is applicable only if you select Scope Mode as the mode within Configure Acquisition Mode .
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
channel name
points per record
Number of data points within each record.
Valid Range: 2 to 1,024
Default: 200
scope record length
Total duration of time, in seconds, of each Scope mode measurement.
Valid Range: 0.00001 to 0.300
Default: 0.020
session out
Reference to your instrument session passed to the next node.
error out
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Configuring a Gate or Fence for a Scope Acquisition Mode Application
To configure a gate or fence for your scope acquisition mode application, use Configure Scope Gate or Configure Scope Fence .