Enables or disables the duty cycle correction and configures the duty cycle correction for pulse power measurements.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Duty cycle correction the power meter uses to calculate the pulse power of a pulse-modulated signal.
The duty cycle indicates the percentage of time a signal is active high, so specifying a higher value indicates that the device expects the measured signal to be active high a greater portion of the time. The value of this input is specified as a percentage.
Valid Range: 0.01 to 100
Default: 100
Reference to your instrument session passed to the next node.
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.