Table Of Contents

Loading and Saving the Configuration File

Version:
Last Modified: February 23, 2021

  1. Select OTA»Open Configuration File from the mmWave OTA Validation Configurator header menu.
  2. Locate an existing OTA configuration CSV file, then click OK. If the configuration file has specified the corresponding RFmx NR measurement TDMS configuration file, and the RFmx SFP is not open, the mmWave OTA Validation Configurator launches the RFmx SFP and loads the settings.
  3. Configure the settings for your OTA test.
  4. Select OTA»Save Configuration File from the header menu.
  5. Select a location to save the configuration file, then click OK. If the RFmx SFP is open, the mmWave OTA Validation Configurator saves the RFmx SFP settings to a TDMS configuration file.

Recently Viewed Topics