Table Of Contents

Fetch CHP Results VI

Version:
Last Modified: August 28, 2020

Fetches the total radiated power (TRP) of channel power with the specified Frequency, Beam index, and Polarization. This VI also returns the beam peak power and position.

Selector String

Specifies a selector string composed of the signal name and the result name.

If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default is "" (empty string).

Example:

  • "signal::sig1"
  • "result::r1"
  • "signal::sig1/result::r1"
spd-note-note
Note  

Add the signal:: and result:: prefix to the value of the signal and result name. Separate the signal and result name with a forward slash.

Session Handle in

Specifies the OTA session.

Frequency

Specifies the frequency.

Beam

Specifies the antenna beam index.

Polarization

Specifies the antenna polarization.

0 The horizontal polarization.
1 The vertical polarization.
2 Both horizontal and vertical polarization.

error in (no error)

Describes error conditions that occur before this node runs. This input provides standard error in functionality.

Session Handle out

Passes a reference of the OTA session to the next VI.

Power

Returns the total radiated power, in dBm, of all the positions.

Beam Peak

Returns the channel power and position of the beam peak.

Power Returns the channel power of the beam peak.

Azimuth Returns the azimuth angle of the beam peak.

Elevation Returns the elevation angle of the beam peak.

error out

Error information. This output provides standard error out functionality.


Recently Viewed Topics