Table Of Contents

Set Measurement Route VI

Version:
Last Modified: August 28, 2020

Configures the list of points to sweep for the measurement.

This VI creates an internal list of all permutations of points to sweep with the specified elevation and azimuth arrays.

Session Handle in

Specifies the OTA session.

Elevations

Specifies an array that contains the grid information of the elevation angles to run in the hardware measurement.

Azimuths

Specifies an array that contains the grid information of the azimuth angles to run in the hardware measurement.

Sweep Mode

Specifies the mode in which the positioner sweeps angles while in Autonomous mode.

Elevation The positioner sweeps all elevations first for the specified azimuths.
Azimuth The positioner sweeps all azimuths first for the specified elevations.

error in (no error)

Describes error conditions that occur before this node runs. This input provides standard error in functionality.

Session Handle out

Passes a reference of the OTA session to the next VI.

error out

Error information. This output provides standard error out functionality.


Recently Viewed Topics