Last Modified: June 25, 2019

Returns the exponential fit of a data set using a specific fitting method.

Dependent values representing the *y*-values of the data set.

This input accepts a double-precision, floating-point number or a 1D array of double-precision, floating-point numbers.

This input changes to **signal** when the data type is a waveform or a 1D array of waveforms.

Independent values representing the *x*-values of the data set.

This input accepts a double-precision, floating-point number or a 1D array of double-precision, floating-point numbers.

This input is available only if you wire a double-precision, floating-point number or a 1D array of double-precision, floating-point numbers to **y** or **signal**.

Value that determines when to stop the iterative adjustment of the amplitude, damping, and offset.

If **tolerance** is less than or equal to 0, this node sets **tolerance** to 0.0001.

This input is available only if you wire one of the following data types to **signal** or **y**.

How tolerance Affects the Outputs with Different Fitting Methods

For the Least Square and Least Absolute Residual methods, if the relative difference between **residue** in two successive iterations is less than **tolerance**, this node returns the resulting **residue**. For the Bisquare method, if any relative difference between **amplitude**, **damping**, and **scale** in two successive iterations is less than **tolerance**, this node returns the resulting **amplitude**, **damping**, and **scale**.

**Default: **0.0001

Length of each set of data. The node performs computation for each set of data.

When you set **block size** to zero, the node calculates a cumulative solution for the input data from the time that you called or initialized the node. When **block size** is greater than zero, the node calculates the solution for only the newest set of input data.

This input is available only if you wire a double-precision, floating-point number to **signal** or **y**.

**Default: **100

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an **error in** input and an **error out** output so that the node can respond to and communicate errors that occur while code is running. The value of **error in** specifies whether an error occurred before the node runs. Most nodes respond to values of **error in** in a standard, predictable way.

**Default: **No error

Upper and lower constraints for the amplitude, damping, and offset of the calculated exponential fit.

This input is available only if you wire one of the following data types to **signal** or **y**:

Lower bound for the amplitude.

**Default: **-Infinity, which means no lower bound is imposed on the amplitude.

Upper bound for the amplitude.

**Default: **Infinity, which means no upper bound is imposed on the amplitude.

Lower bound for the damping.

**Default: **-Infinity, which means no lower bound is imposed on the damping.

Upper bound for the damping.

**Default: **Infinity, which means no upper bound is imposed on the damping.

Lower bound for the offset.

**Default: **0

Upper bound for the offset.

**Default: **0

The fitting method.

This input is available only if you wire one of the following data types to **signal** or **y**:

Name | Value | Description |
---|---|---|

Least Square | 0 | Uses the least square method. |

Least Absolute Residual | 1 | Uses the least absolute residual method. |

Bisquare | 2 | Uses the bisquare method. |

Algorithm for the Least Square Method

The least square method of fitting finds the **amplitude**, **damping**, and **offset** of the exponential model by minimizing the **residue** according to the following equation:

$\frac{1}{N}\underset{i=0}{\overset{N-1}{\sum}}{w}_{i}{({f}_{i}-{y}_{i})}^{2}$

where

*N*is the length of**y**or the number of data values in a waveform*w*_{i}is the*i*^{th}element of**weight***f*_{i}is the*i*^{th}element of**best exponential fit***y*_{i}is the*i*^{th}element of**y**or the*i*^{th}data value in a waveform

Algorithm for the Least Absolute Residual Method

The least absolute residual method finds the **amplitude**, **damping**, and **offset** of the exponential model by minimizing the **residue** according to the following equation:

$\frac{1}{N}\underset{i=0}{\overset{N-1}{\sum}}{w}_{i}|{f}_{i}-{y}_{i}|$

where

*N*is the length of**y**or the number of data values in a waveform*w*_{i}is the*i*^{th}element of**weight***f*_{i}is the*i*^{th}element of**best exponential fit***y*_{i}is the*i*^{th}element of**y**or the*i*^{th}data value in a waveform

Algorithm for the Bisquare Method

The bisquare method of fitting finds the **amplitude**, **damping**, and **offset** using an iterative process, as shown in the following illustration.

The node calculates **residue** according to the following equation:

$\frac{1}{N}\underset{i=0}{\overset{N-1}{\sum}}{w}_{i}{({f}_{i}-{y}_{i})}^{2}$

where

*N*is the length of**y**or the number of data values in a waveform*w*_{i}is the*i*^{th}element of**weight***f*_{i}is the*i*^{th}element of**best exponential fit***y*_{i}is the*i*^{th}element of**y**or the*i*^{th}data value in a waveform.

**Default: **Least Square

Amplitude of the fitted model.

This output can return a double-precision, floating-point number or a 1D array of double-precision, floating-point numbers.

Damping of the fitted model.

This output can return a double-precision, floating-point number or a 1D array of double-precision, floating-point numbers.

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

**error in** input and an **error out** output so that the node can respond to and communicate errors that occur while code is running. The value of **error in** specifies whether an error occurred before the node runs. Most nodes respond to values of **error in** in a standard, predictable way.

Weighted mean error of the fitted model.

This output can return a double-precision, floating-point number or a 1D array of double-precision, floating-point numbers.

Algorithm for Calculating **residue** When the Input Signal is a Double-Precision, Floating-Point Number

When the input signal is a double-precision, floating-point number, this node calculates **residue** according to the following equation:

$\mathrm{residue}=\text{\hspace{0.17em}}\frac{1}{N}\underset{i=0}{\overset{N-1}{\sum}}{({f}_{i}-{y}_{i})}^{2}$

where

*N*is the number of elements in the data set*f*_{i}is the*i*^{th}element of**best linear fit***y*_{i}is the**y**component of the*i*^{th}input data point

This node uses the iterative general least square method and the Levenberg-Marquardt method to fit data to an exponential curve of the general form described by the following equation:

$f=a{e}^{bx}+c$

where

*x*is the input sequence*a*is**amplitude***b*is**damping***c*is**offset**

This node finds the values of *a*, *b*, and *c* that best fit the observations (**x**, **y**).

The following equation specifically describes the exponential curve resulting from the exponential fit algorithm:

$y[i]=a{e}^{bx\left[i\right]}+c$

**Where This Node Can Run: **

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application