Version:

Last Modified: January 12, 2018

Generates a waveform containing periodic random noise (PRN).

You can use periodic random noise to compute the frequency response of a linear system in one time record instead of averaging the frequency response over several time records, as you must for nonperiodic random noise sources.

A Boolean that controls the reseeding of the noise sample generator after the first call of the node.

True | Accepts a new seed and begins producing noise samples based on seed. |

False | Maintains the initial internal seed state and resumes producing noise samples as a continuation of the previous noise sequence. |

**Default: **False

Magnitude of the frequency domain components of the output signal.

**Default: **1

Number that this node uses to initialize the noise generator.

This node initializes the noise generator using **seed** if **reset** is True or if this is the first call of the node.

seed is greater than 0 |
Generates noise samples based on the seed value. |

seed is less than or equal to 0 |
For the first call, this node generates a random seed value and produces noise samples based on that seed value. For subsequent calls to the node, if seed remains less than or equal to 0, the node maintains the initial internal seed state and produces noise samples as a continuation of the initial noise sequence. |

**Default: **-1

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an **error in** input and an **error out** output so that the node can respond to and communicate errors that occur while code is running. The value of **error in** specifies whether an error occurred before the node runs. Most nodes respond to values of **error in** in a standard, predictable way.

**Default: **No error

Sample rate in samples per second.

This input is available only if you configure this node to return a waveform.

**Default: **1000

Number of samples in the signal.

**samples** must be greater than 0. Otherwise, this node returns an error.

This input is available when you configure this node to return a waveform or an array of double-precision, floating-point numbers.

**Default: **1000

Timestamp of the output signal. If this input is unwired, this node uses the current time as the timestamp of the output signal.

This input is available only if you configure this node to return a waveform.

The periodic random noise pattern.

This output can return the following data types:

- Waveform
- Double-precision, floating-point number
- 1D array of double-precision, floating-point numbers

Understanding the Output Array

The output **periodic random noise** contains all frequencies that can be represented with an integral number of cycles in the requested number of **samples**. Each frequency-domain component has a magnitude of **spectral amplitude** and random phase.

Another way of thinking of **periodic random noise** is that it is a summation of sinusoidal signals with the same amplitudes but with random phases. The unit of **spectral amplitude** is the same as **periodic random noise** and is a linear measure of amplitude.

The following values bound the **periodic random noise**:

$\mathrm{spectralamplitude}*(\frac{\mathrm{samples}}{2}-1)\text{\hspace{0.17em}}\text{\hspace{0.17em}}\text{\hspace{0.17em}}\text{\hspace{0.17em}}\text{\hspace{0.17em}}\text{\hspace{0.17em}}$

if **samples** is even

$\mathrm{spectralamplitude}*\frac{\mathrm{samples}-1}{2}$

if **samples** is odd

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

**error in** input and an **error out** output so that the node can respond to and communicate errors that occur while code is running. The value of **error in** specifies whether an error occurred before the node runs. Most nodes respond to values of **error in** in a standard, predictable way.

Periodic random noise contains only integral-cycle sinusoids, which means the noise is self-windowing and does not contains spectral leakage. As a result, you do not need to window periodic random noise before performing spectral analysis.

**Where This Node Can Run: **

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application