Cross Spectrum (Real-Imaginary » Single-shot) (G Dataflow)

A value that affects the output coefficients when window type is Kaiser, Gaussian, or Dolph-Chebyshev.

If window type is any other type of window, this node ignores this input.

This input represents the following information for each type of window:

• Kaiser—Beta parameter
• Gaussian—Standard deviation
• Dolph-Chebyshev—The ratio of the main lobe to the side lobe, s, expressed in decibels

Default: NaN—Causes this node to set beta to 0 for a Kaiser window, the standard deviation to 0.2 for a Gaussian window, and s to 60 dB for a Dolph-Chebyshev window

Time-domain window to apply to the signal.

Default: Rectangle

The input, time domain signal x.

This input accepts the following data types:

• Waveform
• Waveform in complex double-precision, floating-point numbers
• 1D array of double-precision, floating-point numbers
• 1D array of complex double-precision, floating-point numbers

The input, time domain signal y.

This input accepts the following data types:

• Waveform
• Waveform in complex double-precision, floating-point numbers
• 1D array of double-precision, floating-point numbers
• 1D array of complex double-precision, floating-point numbers

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error	error in contains an error
If no error occurred before the node runs, the node begins execution normally. If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.	If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

Sample period of the time-domain signal in seconds.

Set this input to 1/fs, where fs is the sampling frequency of the time-domain signal.

This input is available only if you wire a 1D array of double-precision, floating-point numbers or a 1D array of complex double-precision, floating-point numbers to signal x or signal y.

Default: 1

Real part of the cross power spectrum of the input signals.

f0

Start frequency, in Hz, of the spectrum.

df

Frequency resolution, in Hz, of the spectrum.

real

Real part of the cross power spectrum.

Imaginary part of the cross power spectrum of the input signals.

f0

Start frequency, in Hz, of the spectrum.

df

Frequency resolution, in Hz, of the spectrum.

imaginary

Imaginary part of the cross power spectrum.

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error	error in contains an error
If no error occurred before the node runs, the node begins execution normally. If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.	If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.