Version:

Last Modified: December 18, 2017

Checks whether one or multiple input angles are within the counterclockwise range.

Units of the input and output angles.

Name | Value | Description |
---|---|---|

radian in, radian out | 0 | The units of input and output angles are both radian. |

radian in, degree out | 1 | The unit of input angles is radian. The unit of output angles is degree. |

degree in, degree out | 2 | The units of input and output angles are both degree. |

degree in, radian out | 3 | The unit of input angles is degree. The unit of output angles is radian. |

**Default: **radian in, radian out

Angle at the beginning of the range.

This input accepts the following data types:

The range continues in the counterclockwise direction.
This input converts angles into [0, 360] or [0, 2pi] if you enter angles out of this range.
You must specify the same number of elements in **angle in**, **start angle**, and **end angle**. Otherwise, this node returns an error.

Angle at the end of the range.

This input accepts the following data types:

This input converts angles into [0, 360] or [0, 2pi] if you enter angles out of this range. **end angle** must have the same unit as **start angle**. You must specify the same number of elements in **angle in**, **start angle**, and **end angle**. Otherwise, this node returns an error.

Range of the output angle.

Name | Value | Description |
---|---|---|

none | 0 | The range is [-Inf , Inf]. |

-180 to 180 (-pi to pi) | 1 | The range is [-180, 180] in degrees or [-pi, pi] in radians. |

0 to 360 (0 to 2pi) | 2 | The range is [0, 360] in degrees or [0, 2pi] in radians. |

**Default: **-180 to 180 (-pi to pi)

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an **error in** input and an **error out** output so that the node can respond to and communicate errors that occur while code is running. The value of **error in** specifies whether an error occurred before the node runs. Most nodes respond to values of **error in** in a standard, predictable way.

**Default: **No error

A Boolean that specifies whether to coerce **angle in** to the nearest angle in the range between **start angle** and **end angle** when **angle in** is out of the range. This input does nothing when **angle in** is in the range.

True | angle out returns the nearest angle in the range between start angle and end angle. |

False | angle out returns the same value as angle in. |

**Default: **False

Output angle.

This output can return the following data types:

If **in range?** is True or if **in range?** and **coerce angle** are both False, this output returns the input angle. If **in range?** is False and **coerce angle** is True, this output returns the nearest angle of the input angle in the range between **start angle** and **end angle**.

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

**error in** input and an **error out** output so that the node can respond to and communicate errors that occur while code is running. The value of **error in** specifies whether an error occurred before the node runs. Most nodes respond to values of **error in** in a standard, predictable way.

The following figures demonstrate the input angle in range and out of the range from the start angle to the end angle, respectively.

**Where This Node Can Run: **

Desktop OS: Windows

FPGA: This product does not support FPGA devices

Web Server: Not supported in VIs that run in a web application