Table Of Contents
Sound Nodes
Version:
Last Modified: April 4, 2017
Closes a .wav file.
.gvi.png){kind=icon}
Retrieves data about a .wav file.
Opens a .wav file for reading or writing.
Reads data from a
.wav file into an array of waveforms.
Reads data from a .wav file into an array of waveforms. This node automatically opens, reads, and closes the .wav file.
.gvi.png){kind=icon}
Writes data from a waveform or an array of waveforms to a
.wav file.
Writes data from an array of waveforms to a .wav file. This node automatically opens, writes to, and closes the .wav file.
Stops acquisition of data, clears the buffer, returns the task to the default state, and clears the resources associated with the task. The task becomes invalid.
Configures a sound input device to acquire data and send the data to the buffer. Use Sound Input Read to read the data.
Reads data from a sound input device. You must use Sound Input Configure to configure the device.
Starts data acquisition from the device. This node is necessary only if Sound Input Stop has previously been called.
Stops data acquisition from the device. Use Sound Input Clear to clear the data in the buffer. Use Sound Input Start to restart the acquisition after calling Sound Input Stop.
Stops the device from playing sound, clears the buffer, returns the task to the default state, and clears the resources associated with the task. The task becomes invalid.
Configures a sound output device to generate data. Use Sound Output Write to write the data to the device.
Returns information about the current state of a sound output task.
.gvi.png){kind=icon}
Sets the volume at which the sound output device plays.
Starts playback from the device. This node is necessary only if Sound Output Stop has previously been called.
Stops the device from playing sound from the buffer. Use Sound Output Clear to clear the data in the buffer. Use Sound Output Start to restart output.
Waits until all of the sound is played by the output device.
.gvi.png){kind=icon}
Writes data to a sound output device. You must use Sound Output Configure to configure the device if you are writing continuously.
Opens a file and starts playing it immediately.