Controls the LEDs on all RT Series devices.
Number of the LED that the VI modifies. The LED number depends on the type of hardware. LED num is zero-indexed. You can specify LED num 0 to control the User1 LED for most LabVIEW Real-Time targets.
State to assign to the LED.
Name | Description |
---|---|
Off |
Turns off the LED |
Default Color 1 |
Sets the LED to the device default color 1 |
Default Color 2 |
Sets the LED to the device default color 2 (if available) |
Toggle |
Toggles between off and device default color 1 |
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Where This Node Can Run:
Desktop OS: none
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application