From 12:00 AM CDT Sunday, October 17 - 11:30 AM CDT Sunday, October 17, will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

I/O Module Properties (G Dataflow)

    Last Modified: November 4, 2020

    Gets or sets one or more properties on an I/O module under an FPGA target.

    The properties available vary by the FPGA target or the C Series module and the I/O resource. To select a property, first wire a Module constant to the I/O Module Properties node. Then, click the Property section of the I/O Module Properties node and select a property from the shortcut menu. To add additional properties to an I/O Module Properties node, expand the I/O Module Properties node by dragging the upper or lower edge of the node with the Positioning tool.


    Product Number

    Product number of the module, for example, 0x7315 for NI 9215 with BNC and 0x70A6 for NI 9215 with screw terminal.


    Model Number

    Model number of the module, for example, 9215, regardless of the connector used.


    Serial Number

    The unique serial number of the module.


    Vendor ID

    The NI vendor ID for the module, for example, 0x1093 for NI modules.

    Where This Node Can Run:

    Desktop OS: none

    FPGA: C Series devices only

    Web Server: Not supported in VIs that run in a web application

    Recently Viewed Topics