Table Of Contents
Threshold 1D Array (G Dataflow)
Interpolates points in a 1D array that represents a 2D non-descending graph. This node compares a threshold to the values in an array, starting at a specified index, until it finds a pair of consecutive elements such that the threshold is greater than the value of the first element and less than or equal to the value of the second element.
array of numbers or points
An array of numbers or an array of points where each point is a cluster of x- and y-coordinates.
If this input is an array of numbers, this node assumes the x-coordinates are the same as the indexes of the array itself.
If this input is an array of points, this node uses the second elements in the clusters, or the y-coordinates, to obtain a fractional index that it then uses to interpolate the corresponding x value.
threshold y
The threshold value for the node. If threshold y is less than or equal to the array value at start index, the node returns start index for fractional index or x. If threshold y is greater than every value in the array, the node returns the index of the last value. If the array is empty, the node returns NaN.
start index
The index to start interpolation.
Default: 0—The node returns the result calculated from the entire array rather than a specified section of the array.
fractional index or x
The interpolated result calculated for the array of numbers or points 1D input array.
If array of numbers or points is an array of points where each point is a cluster of x- and y-coordinates, fractional index or x is the interpolated x value corresponding to the interpolated position of threshold y among the y-coordinates, rather than the fractional index of the array. fractional index or x returns the interpolated x value associated with the given y value if you graphed the points.
Method for Calculating Fractional Index
This node calculates the fractional distance between the first value and threshold y and returns the fractional index at which threshold y would be placed within array of numbers or points using linear interpolation.
Use Threshold 1D Array Only with Non-Descending Arrays
This node only returns a reliable fractional index or x result for non-descending arrays. This node might return unexpected data for the following reasons:
- This node does not recognize the index of a negative slope crossing.
- This node does not return multiple fractional index or x results if the input array crosses threshold y at multiple points.
- This node returns the start index value if threshold y is less than the value at start index.
Use Threshold Detector for more advanced analysis of arrays.
| array of numbers or points | start index | threshold y | fractional index or x | comments |
|---|---|---|---|---|
| [4, 5, 5, 6] | 0 | 5 | 1 | The output is 1, corresponding to the index of the first value of 5 the node finds. |
| [2.3, 5.2, 7.8, 7.9, 10.0] | 0 | 6.5 | 1.5 | The output is 1.5 because 6.5 is halfway between 5.2 (index 1) and 7.8 (index 2). |
| [0, 1, 2, 3, 4, 9.1, 10.3, 12.9, 15.5] | 5 | 14.2 | 7.5 | threshold y falls between elements 7 and 8 because 14.2 is midway between 12.9 and 15.5. Therefore, the output is 7.5, halfway between 7 and 8. |
| Array of points
[(1,1), (2,2), (3,3), (4,4), (-2.5,5), (0,6) |
0 | 5.5 | -1.25 | The output is not an index value of 4.5 as it would be for a numeric array, but rather an x value of -1.25, which is the interpolated x value associated with the given y value if you graphed the points. |
Where This Node Can Run:
Desktop OS: Windows
FPGA: All devices (only within an optimized FPGA VI)
Web Server: Supported in VIs that run in a web application