Limit Testing (Constant Limit » Time) (G Dataflow)

The input signal.

This input can be a waveform or an array of waveforms.

Upper limit that bounds the limit testing.

Default: 1

Lower limit that bounds the limit testing.

Default: -1

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error	error in contains an error
If no error occurred before the node runs, the node begins execution normally. If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.	If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

Pass region for the limit test and whether to include the limit values in the region.

pass region

Region where signal points fall that passes the limit test.

Name	Value	Description
inside limits	0	The signal is within lower limit and upper limit.
outside limits	1	The signal is not within lower limit and upper limit.

Default: inside limits

include upper limit

A Boolean to determine whether signal points that fall on the upper limit passes the limit test.

True	Signal points that fall on the upper limit passes the limit test.
False	Signal points that fall on the upper limit does not pass the limit test.

Default: True

include lower limit

A Boolean to determine whether signal points that fall on the lower limit passes the limit test.

True	Signal points that fall on the lower limit passes the limit test.
False	Signal points that fall on the lower limit does not pass the limit test.

Default: True

Locations of failed test points.

This output can return a cluster or an array of clusters.

x values

x-value locations of failed test points.

y values

y-value locations of failed test points.

A Boolean that returns the result of limit testing for the input signal.

An array of Boolean or cluster that returns the results of the limit testing at each data point.

Upper and lower limits, the input signal, and the failures.

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error	error in contains an error
If no error occurred before the node runs, the node begins execution normally. If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.	If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Measurement of distance between the signal and upper limit and lower limit.

This output can be a cluster or an array of clusters.

clearance upper limit

Minimum distance between the signal and the upper limit.

clearance lower limit

Minimum distance between the signal and the lower limit.

min clearance

Minimum, overall distance between the signal and the limits.

min clearance is the minimum of clearance upper limit and clearance lower limit.