High Throughput Sine and Cosine (Clock-Driven Logic)

An input to this operation.

You must specify this input in pi radians, which use fewer resources than radians. To convert radians to pi radians, multiply the radian value by pi.

Boolean value that describes whether the next data point has arrived for processing. Wire the output valid output of an upstream node to this input to transfer data from the upstream node to this node.

Boolean value that specifies whether downstream nodes are ready for this node to return a new value.

Use Feedback Node to wire ready for input of a downstream node to ready for output of the current node. If this input is False during a given cycle, output valid returns False during that cycle.

Default: False

Result of the operation in pi radians, which uses fewer resources on the FPGA.

Result of the operation in pi radians, which uses fewer resources on the FPGA.

Boolean value that indicates whether this node computes a result that downstream nodes can use.

Wire this output to input valid of a downstream node to transfer data from the node to the downstream node.

True	Downstream nodes can use the result this node computes.
False	This node returns an undefined value that downstream nodes cannot use. Note   This node may return different undefined values when executed in simulation mode versus when executed on hardware.

Boolean value that indicates whether this node is ready to accept new input data.

Use Feedback Node to wire this output to ready for output of an upstream node.

Note  

If this output returns False during a given cycle, this node discards any data that other nodes send to this node during the following cycle. This node discards the data even if input valid is True during the following cycle.