Table Of Contents

IVI Switch Scan Nodes (G Dataflow)

Last Modified: September 7, 2018

node_icon
Initiates a scan using the scan list and triggers you configure with the IviSwtch Configure Scan List [SCN] and IviSwtch Configure Scan Trigger [SCN] nodes.
node_icon
Aborts a previously initiated scan.
node_icon
Returns the state of the switch module. This node indicates if the instrument is currently scanning or is idle.
node_icon
Waits until the instrument stops scanning.
node_icon
Sends a command to trigger the switch. Call this node if you pass IVISWTCH_VAL_SOFTWARE_TRIG for the Trigger Input parameter of the IviSwtch Configure Scan Trigger [SCN] Node.
node_icon
Sets the continuous scan mode on the instrument.

Recently Viewed Topics