Table Of Contents

IVI RF Signal Generator Pulse Generator Nodes (G Dataflow)

Last Modified: October 23, 2017

node_icon
Configures the trigger source, pulse width, and gating enabled for the pulse generator within the RF signal generator.
node_icon
Sets the double pulse state and delay for the pulse generator within the RF signal generator.
node_icon
Configures the triggering of the pulse generator within the RF signal generator. This node specifies the external trigger slope and the delay time for starting the pulse after the trigger pulse.
node_icon
Specifies the time period (repetition rate) of the pulse generator when using the internal trigger (free run) mode.
node_icon
Configures the output and polarity of the pulse generator within the RF signal generator.

Recently Viewed Topics