Table Of Contents

IVI RF Signal Generator Digital Modulation Base Nodes (G Dataflow)

Last Modified: October 23, 2017

node_icon
Clears (deletes) all named bit sequences.
node_icon
Configures the DigitalModulationBase clock source
node_icon
Configures the source of the data for the digital modulation.
node_icon
Configures the type of the PRBS used as data for the digital modulation. The setting is used only if IviRFSigGen>>Digital Modulation Functionality Extended Properties>>DigitalModulationBase Data Source is set to PRBS.
node_icon
Returns the specific driver defined DigitalModulationBase standard name that corresponds to the one-based index specified by the Index parameter.
node_icon
Sets a bit sequence to be used as digital modulation data. Create bit sequences using the IviRFSigGen Write DigitalModulationBase Bit Sequence [DMB]. The bit sequence is set only if the IviRFSigGen>>Digital Modulation Functionality Extended Properties>>DigitalModulationBase Data Source property is set to BitSequence.
node_icon
Specifies the actual standard used by the instrument. To obtain a list of available standards, call the IviRFSigGen Get Digital Modulation Base Standard Name [DMB]. Many instrument settings are affected by selecting an instrument standard. These settings include: coding, mapping, symbol rate or bit clock frequency, filter together with the associated filter parameters, and FSK deviation or ASK depth (in the case of FSK or ASK modulation).
node_icon
Creates a bit sequence for use as the digital modulation data. The sequence is repeated continuously. The sequence string consists of binary values (8 bit in 1 char/byte).

Recently Viewed Topics