Table Of Contents

IVI RF Signal Generator ARB Generator Nodes (G Dataflow)

Last Modified: October 23, 2017

node_icon
Deletes all the currently defined arb waveforms.
node_icon
Configures the ARB generator by specifying the sample frequency and filter frequency.
node_icon
Configures the trigger event to occur on the rising or falling edge of the input signal
node_icon
Configures the trigger source for the waveform generation. The output waveform is generated continuously if the source is immediate. Otherwise, the output is triggered.
node_icon
Sets a named waveform to be the active waveform. Create arb waveform names using the IviRFSigGen Write Arb Waveform [ARB].
node_icon
Stores the transmitted waveform in the drivers's or instrument's memory.

Recently Viewed Topics