Table Of Contents

IVI Power Meter Configuration Nodes (G Dataflow)

Last Modified: September 7, 2018

node_icon
Enables or disables the auto-averaging mode for a given channel.
node_icon
Sets the average count that the instrument uses in manual averaging mode. The averaging count specifies the number of samples that the instrument takes before the measurement is complete.
node_icon
Enables or disables a specified channel for measurement.
node_icon
Specifies the frequency of the input signal in Hertz.
node_icon
Enables or disables the duty cycle correction and sets the duty cycle correction for pulse power measurements..
node_icon
Configures the instrument to take single or dual channel measurements.
node_icon
Specifies the offset to be added to the measured value in units of dB.
node_icon
Configures lower and upper range values for a given channel.
node_icon
Enables or disables the auto range mode for a given channel.
node_icon
Configures the unit to which the RF power is converted after measurement.
node_icon
Returns the physical channel identifier that corresponds to the one-based index specified by the ChannelIndex parameter.

Recently Viewed Topics