Table Of Contents

IviDmm Configure Transducer Type [TMP] (G Dataflow)

Last Modified: September 7, 2018

Passes the type of device used to measure the temperature.

The driver uses this value to set the IviDmm>Temperature Measurements>Transducer Type [TMP] property.

connector_pane_image
datatype_icon

instrument handle

The instrument handle that you obtain from the IviDmm Initialize Node. The handle identifies a particular instrument session.

Default: None

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

transducer type

Pass the type of device used to measure the temperature. The driver uses this value to set the IviDmm>Temperature Measurements>Transducer Type [TMP] property.

Defined Values

Default: IVIDMM_VAL_THERMOCOUPLE

datatype_icon

instrument handle out

The instrument handle that you obtain from the IviDmm Initialize Node. The handle identifies a particular instrument session.

Default: None

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Defined Values

IVIDMM_VAL_THERMOCOUPLE - Thermocouple

IVIDMM_VAL_THERMISTOR - Thermistor

IVIDMM_VAL_2_WIRE_RTD - 2 Wire Resistance Temperature Device

IVIDMM_VAL_4_WIRE_RTD - 4 Wire Resistance Temperature Device

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server:


Recently Viewed Topics