Table Of Contents

IviDigitizer Configure Temperature Units [BT] (G Dataflow)

Last Modified: October 24, 2017

Configures the temperature units returned by the IviDigitizer Board Temperature and IviDigitizer Channel Temperature properties.

spd-note-note
Note  

This node is part of the IviDigitizerBoardTemperature [BT] extension group.

connector_pane_image
datatype_icon

Temperature Units (Celsius)

Specifies the temperature units used by the IviDigitizer Board Temperature and IviDigitizer Channel Temperature properties. This value sets the IviDigitizer Temperature Units property. Valid Values: - IVIDIGITIZER_VAL_CELSIUS (0) Temperature values returned from the digitizer are in degrees Celsius. - IVIDIGITIZER_VAL_FAHRENHEIT (1) Temperature values returned from the digitizer are in degrees Fahrenheit. - IVIDIGITIZER_VAL_KELVIN (2) Temperature values returned from the digitizer are in degrees Kelvin. Default Value: IVIDIGITIZER_VAL_CELSIUS (0)

datatype_icon

instrument handle out

The instrument handle that you obtain from the IviDigitizer Initialize Node or IviDigitizer Initialize With Options Node. The handle identifies a particular instrument session.

Default: None

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.
datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

instrument handle

The instrument handle that you obtain from the IviDigitizer Initialize Node or IviDigitizer Initialize With Options Node. The handle identifies a particular instrument session.

Default: None

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics