Table Of Contents

IviDigitizer Configure Reference Oscillator [RO] (G Dataflow)

Last Modified: October 24, 2017

Configures the reference oscillator of the digitizer.

spd-note-note
Note  

This node is part of the IviDigitizerReferenceOscillator [RO] extension group.

connector_pane_image
datatype_icon

Oscillator Frequency (1.0e6)

Specifies the frequency of the external reference oscillator. This input is used only if the Oscillator Source input is set to External. The driver uses this value to set the IviDigitizer Reference Oscillator External Frequency property. Unit: Hertz Default Value: 1.0e6

datatype_icon

Oscillator Source (Internal)

Specifies the source of the reference frequency signal. The driver uses this value to set the IviDigitizer Reference Oscillator Source property. Valid Values: - IVIDIGITIZER_VAL_REFERENCE_OSCILLATOR_SOURCE_INTERNAL (0) The internal reference oscillator is used. - IVIDIGITIZER_VAL_REFERENCE_OSCILLATOR_SOURCE_EXTERNAL (1) An external reference oscillator is used. IVIDIGITIZER_VAL_REFERENCE_OSCILLATOR_SOURCE_PXI_CLK10 (2) The PXI/PXIe backplane 10 MHz reference. IVIDIGITIZER_VAL_REFERENCE_OSCILLATOR_SOURCE_PXIE_CLK100 (3) The PXIe backplane 100 MHz reference. Default Value: IVIDIGITIZER_VAL_REFERENCE_OSCILLATOR_SOURCE_INTERNAL (0)

datatype_icon

instrument handle out

The instrument handle that you obtain from the IviDigitizer Initialize Node or IviDigitizer Initialize With Options Node. The handle identifies a particular instrument session.

Default: None

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.
datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

instrument handle

The instrument handle that you obtain from the IviDigitizer Initialize Node or IviDigitizer Initialize With Options Node. The handle identifies a particular instrument session.

Default: None

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics