From 12:00 AM CDT Sunday, October 17 - 11:30 AM CDT Sunday, October 17, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

IVI Function Generator Configuration Nodes (G Dataflow)

Last Modified: October 23, 2017

node_icon
Configures the operation mode of the function generator. The operation mode determines how the function generator produces output on a channel. For example, you can select to generate output continuously or to generate a discrete number of waveform cycles based on a trigger event.
node_icon
Configures the output mode of the function generator. The output mode determines the kind of waveform the function generator produces. For example, you can select to output a standard waveform, an arbitrary waveform, or a sequence of arbitrary waveforms.
node_icon
Configures the function generator's reference clock source. The function generator uses the reference clock to derive frequencies and sample rates when generating output.
node_icon
Configures the output impedance for the channel you specify.
node_icon
Configures whether the signal the function generator produces appears at the channel's output connector.
node_icon
Configures the sample clock source for the function generator.
node_icon
Configures whether the sample clock appears at the sample clock output of the generator.
node_icon
Configures the properties of the function generator that affect standard waveform generation. These properties are the waveform, amplitude, DC offset, frequency, and start phase.

Recently Viewed Topics