Table Of Contents

Exporting a Device Configuration

Last Modified: January 3, 2019

Once you have configured a device in InstrumentStudio, you can export the device's settings to a device configuration file, which can then be imported to LabVIEW or another application to apply the device configuration to a different session.

You cannot import a device configuration file into InstrumentStudio. If you would like to save a layout or device configuration for future use in InstrumentStudio, you can either save the entire project ( File» Save all ) or an individual device's soft front panel ( File» Save [device name].sfp ).

  1. Configure the device's settings.
  2. Open the instrument header menu and select Export configuration.
  3. Select the location to save the configuration file.
The device configuration file is saved to the location you specified.

To apply device settings from a device configuration file to a device session in LabVIEW, you must first import the device configuration file to LabVIEW using a driver-specific LabVIEW VI called Import Attribute Configuration. Each driver has its own implementation of Import Attribute Configuration. Refer to the driver's documentation for more information:

Device Driver Import Configuration VI
NI-SCOPE NI-SCOPE Import Attribute Configuration File
NI-DCPower NI-DCPower Import Attribute Configuration File
NI-DMM NI-DMM Import Attribute Configuration File

Recently Viewed Topics