Discover and configure the Xi410 Optris cameras on InsightCM.
Before you begin, complete the set-up process
for the Optris cameras and add a thermal imaging device
. Have your camera IP address(es)
and port number(s) ready.
Add regions of interest
On the Devices tab, double-click the device to which
the camera(s) connect.
Cameras are connected to
but also powered through their connection to the device.
On the Cameras tab, click
In the Add Cameras dialog box, click
Discover and the IP addresses and port numbers of all
valid cameras connected to the device appear in the table.
Select the cameras you want to add and click
When prompted, enter a descriptive name for each camera and click
minutes after you add a thermal imaging device before attempting to discover
and configure temperature