Table Of Contents

Discovering FLIR Cameras

Last Modified: August 30, 2021

Discover and add the FLIR A35 and/or FLIR A65 cameras you will use to monitor your equipment's thermal data.

Ensure that you have completed the steps in Adding a Thermal Imaging Device and that you have the serial number to each camera you intend to add.
  1. Click Configuration »Devices.
  2. On the Devices tab, double-click the device to which the camera(s) connect.
    spd-note-note
    Note  

    Cameras are connected to but also powered through their connection to the device.

  3. On the Cameras tab, click Add.
  4. In the Add Cameras dialog box, click Discover and the serial numbers of all valid cameras connected to the device appear in the table.
  5. Select the cameras you want to add and click Apply.
  6. When prompted, enter a descriptive name for each camera and click OK.
    spd-note-note
    Note  

    Allow several minutes after you add a thermal imaging device before attempting to discover cameras.

Add regions of interest and configure temperature deltas.

Recently Viewed Topics