Table Of Contents

Adding Sensors to Equipment

Last Modified: May 11, 2020

Configure sensor assets for the equipment you are monitoring.

Before you begin, add equipment assets to the Asset Configuration page.
  1. Click Configuration .
  2. Select an equipment asset that needs sensors.
  3. Click Add and expand the Sensors section.

    For wireless condition-monitoring systems using MON-10411(s), consider using the Wireless Sensor Equipment template. The template automatically populates the correct number of sensors on the asset tree to represent a single MON-10411.

  4. Expand the type of device that will monitor your asset and select a sensor.
  5. Enter a descriptive name for the sensor asset in the Name text field.
  6. Specify how many of this asset to add and click OK.
  7. Repeat steps 2-6 to define additional sensors until you have defined all sensors.

    To configure wireless data collection settings, refer to Configuring Data Collection for Wireless Equipment.

    You have finished constructing your asset tree.
You are ready to add a monitoring device and to map device channels to the sensors you just added.

Recently Viewed Topics