Table Of Contents
Supported Hardware
Version:
- FlexLogger 2018 R1 Manual
- FlexLogger 2018 R2 Manual
- FlexLogger 2018 R3 Manual
- FlexLogger 2018 R4 Manual
- FlexLogger 2019 R1 Manual
- FlexLogger 2019 R2 Manual
- FlexLogger 2019 R3 Manual
- FlexLogger 2019 R4 Manual
- FlexLogger 2020 R1 Manual
- FlexLogger 2020 R2 Manual
- FlexLogger 2020 R3 Manual
- FlexLogger 2020 R4 Manual
Last Modified: November 6, 2020
Refer to the following table for a list of hardware devices FlexLogger supports.
CompactDAQ Chassis
| NI Product | Model Name | Notes |
|---|---|---|
| CompactDAQ Chassis | cDAQ-9171 | — |
| cDAQ-9174 | — | |
| cDAQ-9178 | — | |
| cDAQ-9179 | — | |
| cDAQ-9181 | — | |
| cDAQ-9184 | — | |
| cDAQ-9185 | This chassis supports network synchronization using IEEE 802.1AS protocol. Refer to the Using Network Synchronization in Your Acquisition topic for more information. | |
| cDAQ-9188 | — | |
| cDAQ-9188XT | — | |
| cDAQ-9189 | This chassis supports network synchronization using IEEE 802.1AS protocol. Refer to the Using Network Synchronization in Your Acquisition topic for more information. | |
| cDAQ-9191 | — |
C Series Modules
| NI Product | Model Name | Notes |
|---|---|---|
| C Series Voltage Input Modules | NI 9201 | — |
| NI 9202 | — | |
| NI 9205 | — | |
| NI 9206 | — | |
| NI 9209 | — | |
| NI 9215 | — | |
| NI 9220 | — | |
| NI 9221 | — | |
| NI 9222 | — | |
| NI 9223 | — | |
| NI 9224 | — | |
| NI 9225 | — | |
| NI 9228 | — | |
| NI 9229 | — | |
| NI 9238 | — | |
| NI 9239 | — | |
| NI 9242 | — | |
| NI 9244 | — | |
| NI 9251 | — | |
| NI 9252 | The NI 9252 module supports hardware filtering. Refer to the Reducing Signal Noise topic for more information. | |
| C Series Voltage Output Modules | NI 9262 | — |
| NI 9263 | — | |
| NI 9264 | — | |
| NI 9269 | — | |
| C Series Current Input Modules | NI 9203 | — |
| NI 9208 | — | |
| NI 9227 | — | |
| NI 9246 | — | |
| NI 9247 | — | |
| NI 9253 | The NI 9253 module supports hardware filtering. Refer to the Reducing Signal Noise topic for more information. | |
| C Series Current Output Modules | NI 9265 | — |
| NI 9266 | — | |
| C Series Voltage and Current Input Module | NI 9207 | — |
| C Series Sound and Vibration Input Modules | NI 9230 | — |
| NI 9231 | — | |
| NI 9232 | — | |
| NI 9234 | — | |
| NI 9250 | — | |
| C Series Temperature Input Modules | NI 9210 | — |
| NI 9211 | — | |
| NI 9212 | — | |
| NI 9213 | — | |
| NI 9214 | — | |
| NI 9216 | FlexLogger supports resistance measurements for the NI 9216. | |
| NI 9217 | FlexLogger supports resistance measurements for the NI 9217. | |
| NI 9226 | FlexLogger supports resistance measurements for the NI 9226. | |
| C Series Universal Analog Input Modules | NI 9218 | For the NI 9218, all connectivity accessories must be configured in MAX in order to appear in your FlexLogger project. |
| NI 9219 | FlexLogger supports resistance measurements for the NI 9219. | |
| C Series Strain/Bridge Input Modules | NI 9235 | — |
| NI 9236 | — | |
| NI 9237 | — | |
| C Series Counter Input Module | NI 9361 | FlexLogger supports pull-up resistor functionality and input voltage threshold for the NI 9361. |
| C Series Digital Modules (serial digital I/O) | NI 9375 | |
| NI 9403 | ||
| NI 9425 | ||
| NI 9426 | ||
| NI 9476 | ||
| NI 9477 | ||
| NI 9478 | ||
| C Series Digital Modules (parallel digital I/O) | NI 9344 | You cannot use parallel and serial modules together on the same FlexLogger project unless they are installed in separate cDAQ chassis. |
| NI 9401 | ||
| NI 9402 | ||
| NI 9411 | ||
| NI 9421 | ||
| NI 9422 | ||
| NI 9423 | ||
| NI 9435 | ||
| NI 9436 | ||
| NI 9437 | ||
| NI 9472 | ||
| NI 9474 | ||
| NI 9475 | ||
| NI 9481 | ||
| NI 9482 | ||
| NI 9485 | ||
| C Series CAN and Vehicle Multiprotocol Interface Modules | NI 9860 | FlexLogger supports all compatible transceiver cables for the NI 9860 (TRC-8542, TRC-8543, and TRC-8546). |
| NI 9861 | — | |
| NI 9862 | — | |
| C Series LIN Interface Module | NI 9866 | — |
FieldDAQ Devices
| NI Product | Model Name | Notes |
|---|---|---|
| Voltage Input Devices for FieldDAQ | FD-11601 | External powered sensor configuration is supported in FlexLogger. |
| FD-11603 | Revision B and later of the FD-11603 support hardware filtering. Refer to the Reducing Signal Noise topic for more information. | |
| FD-11605 | — | |
| Sound and Vibration Input Devices for FieldDAQ | FD-11634 | — |
| Strain/Bridge Input Devices for FieldDAQ | FD-11637 | Revision B and later of the FD-11637 support hardware filtering. Refer to the Reducing Signal Noise topic for more information. |
| Temperature Input Devices for FieldDAQ | FD-11613 | — |
| FD-11614 | — | |
|
Note: FieldDAQ devices support network synchronization using IEEE 802.1AS protocol. Refer to the Using Network Synchronization in Your Acquisition topic for more information. Note: FieldDAQ devices support hardware filtering. Refer to the Reducing Signal Noise topic for more information. (See Notes column for exceptions.) |
||
PXI Chassis
| NI Product | Notes |
|---|---|
| PXIe-1062Q | FlexLogger does not support any module used in a PXI peripheral slot. |
| PXIe-1065 | |
| PXIe-1066DC | |
| PXIe-1071 | — |
| PXIe-1073 | — |
| PXIe-1075 | — |
| PXIe-1078 | — |
| PXIe-1082 | — |
| PXIe-1082DC | — |
| PXIe-1084 | Supports multi-chassis synchronization. |
| PXIe-1085 (12 GB/s and 24GB/s) | — |
| PXIe-1092 | Supports multi-chassis synchronization. |
| PXIe-1095 | Supports multi-chassis synchronization. |
PXI Controllers
Supported embedded controllers must meet the minimum system requirements. Refer to the System Requirements section of the FlexLogger 2021 R1 Readme for more information.
Table 1. PXI Remote Control
Modules
| NI Product | Notes |
|---|---|
| PXIe-8301 | — |
| PXIe-8360 | — |
| PXIe-8370 | — |
| PXIe-8375 | — |
| PXIe-8381 | — |
| PXIe-8388 | — |
| PXIe-8389 | — |
| PXIe-8394 | — |
| PXIe-8398 | — |
| PXIe-8399 | — |
PXI Modules
| NI Product | Model Name | Compatible Accessories | Notes |
|---|---|---|---|
| PXI Analog Input Modules | PXIe-4300 |
|
— |
| PXIe-4302 |
|
— | |
| PXIe-4303 |
|
— | |
| PXIe-4304 |
|
— | |
| PXIe-4305 |
|
— | |
| PXIe-4309 |
|
— | |
| PXIe-4310 |
|
— | |
| PXIe-4481 | — | — | |
| PXI Strain/Bridge Input Module | PXIe-4330 |
|
— |
| PXIe-4331 |
|
— | |
| PXIe-4339 |
|
— | |
| PXI Displacement Input Module | PXIe-4340 |
|
— |
| PXI Temperature Input Module | PXIe-4353 |
|
— |
| PXIe-4357 |
|
FlexLogger supports resistance measurements for the PXIe-4357. | |
| PXI Analog Output Module | PXIe-4322 |
|
— |
| PXI Sound and Vibration Modules | PXIe-4464 | — | — |
| PXIe-4480 | — | FlexLogger does not support the Charge measurement type. | |
| PXIe-4492 | — | FlexLogger automatically selects the Medium (100 Hz) data rate for the PXIe-449x. Using data rates between 1,000 Hz and 8,000 Hz with the PXIe-449x may cause delays when configuring channels. | |
| PXIe-4496 | — | ||
| PXIe-4497 | — | ||
| PXIe-4498 | — | ||
| PXIe-4499 | — | ||
| PXI Vehicle Multiprotocol Interface Module | PXIe-8510 (2-Port and 6-port) |
|
— |
| PXI CAN Interface Module | PXI-8512 (1-port and 2-port) | — | Must be used in a PXIe Hybrid Compatible slot of a supported PXI Express chassis. For additional information on PXI compatibility with PXI Express chassis, visit ni.com/r/pxicompatibility. |
| PXI LIN Interface Module | PXI-8516 | — | |
| PXI X Series Devices | PXIe-6341 | For information on compatible accessories, visit ni.com/product-documentation/53082/(.*). | — |
| PXIe-6345 | — | ||
| PXIe-6349 | — | ||
| PXIe-6355 | — | ||
| PXIe-6356 | — | ||
| PXIe-6358 | — | ||
| PXIe-6361 | — | ||
| PXIe-6363 | — | ||
| PXIe-6365 | — | ||
| PXIe-6366 | — | ||
| PXIe-6368 | — | ||
| PXIe-6375 | — | ||
| PXIe-6376 | — | ||
| PXIe-6378 | — | ||
| PXIe-6386 | — | ||
| PXIe-6396 | — |
USB Devices
| NI Product | Model Name | Compatible Accessories | Notes |
|---|---|---|---|
| CAN Interface Devices | USB-8502 | — | — |
| LIN Interface Devices | USB-8506 | — | — |
| USB X Series Devices | USB-6341 | — | Screw Terminal or BNC Model |
| USB-6343 | — | Screw Terminal or BNC Model | |
| USB-6346 | — | Screw Terminal or BNC Model | |
| USB-6349 | — | Screw Terminal Model | |
| USB-6351 | — | Screw Terminal Model | |
| USB-6353 | — | Screw Terminal Model | |
| USB-6356 | — | Screw Terminal Model | |
| USB-6361 | For information on compatible accessories, visit ni.com/product-documentation/53082/(.*). | Screw Terminal, BNC, or Mass Termination Model | |
| USB-6363 | Screw Terminal, BNC, or Mass Termination Model | ||
| USB-6366 | Screw Terminal, BNC, or Mass Termination Model |