Table Of Contents

Discovering Your Hardware

Last Modified: August 20, 2020

FlexLogger automatically discovers any installed hardware and displays it in the Channel Specification.

You can view your hardware in the Channel Specification to begin configuring and managing the signals in your system, such as in the following example system:

Available device channels are beneath the module information. Data acquisition modules show the model name and number along with the slot they are installed in. Automotive devices (CAN and LIN) display all available ports, and channels you add are listed beneath the device port information.

When FlexLogger discovers your hardware and it appears in the project, you can configure device channels.

What if my hardware does not appear?

If your expected hardware does not automatically appear in the Channel Specification, try one of the following options:

What if my hardware appears grayed out?

If your hardware appears as undetected, try one of the following options:
  • Click the Reassign button ( ) to transfer the module project settings to another compatible module in your system.
    spd-note-notice
    Notice  

    You cannot undo this operation.

  • Click the Delete button ( ) to remove the hardware from the project.

Recently Viewed Topics