Table Of Contents

Creating a New Project

Last Modified: September 27, 2021

Create a new project in FlexLogger to configure hardware, specify logging properties, and run your test.

  1. Launch FlexLogger.
  2. Create a new project in one of the following ways:
    • Click Data Logging Project from the launcher.
    • Select File»New»Project.
  3. To save the project, select File»Save All.
  4. Specify the project name and file location.
  5. Click Save.

    Only one FlexLogger project can be in use at any time.

After you create a new project, use FlexLogger to discover your hardware.

Recently Viewed Topics