Table Of Contents

Configuring Analog Output in Your Channel Specification

Last Modified: June 28, 2021

You can add your current or voltage output to the project by configuring signals in the Channel Specification. Configure current or voltage generation by enabling the channel and determining the output settings.

  1. Select one or more channels you wish to configure.
  2. Hover over a channel row and click the Configure gear .

    The configure gear appears when selecting multiple channels of the same data type (analog, digital, counter, calculated, and so on). If channels of different data types are selected, the configure gear will not appear.

  3. Optional: Specify the channel name in the Name field.
  4. Select Current or Voltage from the Physical Generation drop-down menu.

    Available output options vary by device.

  5. If applicable, specify the output Value for the channel or map to an input channel Source to use as the channel output.

    FlexLogger does not support waveform output. Output signals are software timed and nondeterministic.

  6. If applicable, specify the Signal Range minimum and maximum.
  7. Apply any additional applicable configuration options to the output. Refer to the Configuring I/O Channels topic for more information on available options.

    FlexLogger does not log output channels.

Recently Viewed Topics