Add a channel that applies RMS or Mean averaging to the data in an existing hardware channel.
The RMS or Mean channel produces a new value based on averaging performed on the data in a channel in the system.
On the Channel Specification toolbar, select or Mean, depending on the type of
averaging you wish to perform.
A configuration dialog opens.
Data source button. Select the channel from which you want the RMS or Mean calculation performed.
If no channels appear in the selector, ensure that you have configured channels in your
Block size, and
Description for the calculated channel, if necessary.
After you configure the calculated channel, you can see the live value reflecting the averaging you applied to your data.
You can use the RMS or Mean calculated channel like any other channel defined in the
A calculated channel appears at the top of the
Calculated channel data is logged with all
other channels configured in your Channel Specification. For more information on
logging data, refer to the Defining Your Test Configuration topic.