You can add your current or voltage output to the project by configuring signals in the Channel Specification. You configure
current or voltage generation by enabling the channel and determining the output settings.
Select one or more channels you wish to configure.
Hover over a channel row to see the Configure gear
. Click the gear for the
channel or channels you wish to configure.
The configure gear appears when selecting multiple channels of the same data
type (analog, digital, counter, calculated, and so on). If channels of
different data types are selected, the configure gear will not be
Specify the channel name in the Name field, if
Voltage from the
Physical Generation pull-down selector.
Available output options vary by device.
If applicable, apply the desired output
Value for the channel and the
Maximum limits for the generation.
If necessary, apply any additional applicable configuration options to the
output. Refer to the Configuring I/O
Channels topic for more information on available options.