Table Of Contents

Mapping an Indicator to a Channel

Last Modified: December 9, 2019

Add indicators to your Screens document and map them to any signals you want to view.


You must have channels added and configured for your FlexLogger project in order to visualize data from your sensor signals. Refer to the Configuring Device Channels topic for more information.

  1. On the screen, select the indicator from the indicators palette you want to map a channel to.
  2. Click the icon at the upper right of the object.
  3. Select one or more channels to map to the indicator. After you select a channel, the signal is immediately visible on the indicator.

Indicators on the Screens document display the electrical signals, but do not indicate that you are logging data. Use the RUN and STOP buttons at the top of the document to manually control data logging. Refer to the Logging Data topic for more information.

Recently Viewed Topics