Table Of Contents

Unpacking the ECUTS-16001

Version:
    Last Modified: March 29, 2021

    spd-note-note
    Note  

    The ECUTS-16001 shipping crate requires a clearance of at least 4 meters (13 ft) in front of the crate to lay out the crate ramp and roll the ECUTS-16001 out of the crate.

    Equipment

    • Scissors, knife, or box cutter
    1. Release the six latches securing the front panel to the crate.
    2. Lower the top end of the front panel onto the base of the shipping crate.
    3. Insert the notched top of the front panel into the groove on the bottom of the crate opening to use the front panel as a ramp.
    4. Verify the crate ramp is secure.
    5. Inspect the accessories for any physical damage.
    6. Unlatch and remove the upper and lower battens holding the ECUTS-16001 in place.
    7. Unlock the brakes on the two visible caster wheels.
    8. With two people, slowly roll the ECUTS-16001 out of the crate and down the ramp.
    9. Open and remove the poly antistatic bag from the ECUTS-16001.
    10. Inspect the ECUTS-16001 for any physical damage.
    Contact NI Support if:
    • The ECUTS-16001 is physically damaged.
    • Any additional materials or boxes are physically damaged.
    • The contents of the ECUTS-16001 crate do not match the sales agreement or packing list.

    Recently Viewed Topics