Table Of Contents

(ECUTS-16000) Replacing the Multioutlet

Version:
    Last Modified: March 29, 2021

    Equipment

    • #2 Phillips screwdriver
    1. Power off the ECUTS-16000.
    2. Open the rear cabinet door.
    3. Disconnect all cables from the multioutlet.
    4. Remove the screws securing the multioutlet to the test rack using the #2 Phillips screwdriver.
    5. Remove the multioutlet from the ECUTS-16000.
    6. Place the replacement multioutlet into the ECUTS-16000.
    7. Screw in the screws securing the multioutlet to the test rack using the #2 Phillips screwdriver.
    8. Connect the cables to the multioutlet.
    9. Close the rear cabinet door.

    Recently Viewed Topics