Table Of Contents

Configuring the ECUTS

    Last Modified: March 29, 2021

    1. Complete the Windows out-of-box experience according to facility practices.
    2. Sign in to the ECUTS using the login information created in step 1.
    3. If necessary, configure the network and user settings according to standard facility practices. Adhere to the following ECUTS network restrictions.

      By default, the ECUTS uses DHCP and does not require network configuration.

      1. Ensure the port 0 network does not use subnet 169.254.160.X. These IP addresses are reserved for ECUTS internal functions.
      2. Do not change the settings for the ECUTS port 1 network adapter.

    Recently Viewed Topics