Table Of Contents

Configuring the SLSC Chassis

Version:
    Last Modified: March 29, 2021

    1. Reset the SLSC chassis to the default factory settings.
      1. Press the Reset button on the rear of the SLSC for five seconds.
      2. Release the Reset button
      3. Press the Reset button for an additional five seconds.
    2. Sign in to the ECUTS.
    3. Launch NI MAX on the PXI controller and navigate to My System»Devices and Interfaces»Network Devices.
    4. Select the SLSC chassis from the Network Devices menu.
    5. Navigate to Network Settings.
    6. Click Log In.
    7. Login using the following credentials:
      • Username: admin
      • Password: leave blank
    8. Select Static from the Configure IPv4 drop-down menu.
    9. Enter 169.254.160.10 in the IPv4 Address text box.
    10. Enter 255.255.0.0 in the Subnet Mask text box.
    11. Click Save.
    12. Select Yes when asked to reboot the SLSC chassis.

    Recently Viewed Topics